Productdescribe:Drawer Type Permanent Magnetic Grills are used for separation of iron part···
1 Piece/Pieces
Shenyang
Product describe:
Drawer Type Permanent Magnetic Grills are used for separation of iron particles from dry, granular or free flowing product / materials. Drawer Magnetic Grills are made by using stainless steel having (Round or square or rectangular) with magnetic rods mounted on drawer.
The Drawer Type grills are made up of magnetic elements, which are fitted in a drawer and is moving in a housing. Magnetic Elements are made up of hard ferrite ceramic magnets or high intensity rare earth magnets ( Ndfeb ). All the components are made up of Stainless Steel 304/316 material. The overall construction of the magnetic grills can also be made as per the customer specification and sizes
The grills are efficiently utilized if contamination is within 1% to 1.5% by weight. For higher levels of contamination Drawer Grills or Multi Drawer Grills should be used.
Low Intensity Magnetic Grill having Gauss value of approximately 2,500 Gauss are ideal for trapping contamination such as Nuts, Bolts, Screws, broken washers etc. these grills are designed to attract larger iron pieces from relatively larger distance.
Medium Intensity Magnetic Grill having Gauss value of approximately 5,500 Gauss are used where the contamination is in particle form, however there may or may not be continuous flow of material to be separated. The contamination size may be as low as 150 microns but not lower than that. The material should be free flowing and non sticky.
High Intensity Magnetic Grill having Gauss value of approximately 10,000 Gauss are employed at locations where separation of contamination particles as small as 1 microns is required. These grills have been designed to attract super fine particles from the carrier material.
In all the three classes of grill, it is a necessity to clean the grills at regular intervals. It is recommended to clean the grill thoroughly before every pass (or as scheduled as per users requirement and experience). More accumulation of Iron particles for long time will reduce the effectiveness of the grill. For highest attraction, the grill needs to be fully clean.
Standard Size Drawer Type Magnetic Grill:
Products shows
Plastic
Food Products. (Sugar, Coffee, Tea, Grains, Pulses, Flour, Spices, Milk etc.)
Pharmaceutical
Chemical
Ceramic
Colors / Paints
Pigments
Ink
Refractory
Mineral
All construction element of the grill magnet are in S.S. 304/ S.S.316
Customized grill designs and magnetic grid designs available.
Medium and High intensity Grills with Maximum operating temperature 250℃ also available.
30+ years of experience in design and development of Permanent Magnets and Magnetic Systems
Magnet Grills are also available with 10,000 Gauss for operating temperature up to 200°C
Easy to clean and no maintenance cost and preventing expensive shut down and delays for equipment down the process line
No power cost
Installation of these grills improves product quality thereby enhances product value and helps in meeting FDA and other government/customer regulations on iron contamination levels
Services such as magnetic calibration/Audit are available
DS also makes customized design and self cleaning grills